![]() How to Detail (Wash and Wax) a Van or RV.Ram ProMaster, Ford Transit or Mercedes-Benz Sprinter?.L-Track Install (Airline Track) in a Sprinter Van.Attaching Cabinet Hardware to 80/20 Extruded Aluminum Framing.80/20 Extruded Aluminum Van Cabinet Plans.Simple Hot Water Shower System for a Van or RV.PVC Water Tank Build – DIY Gray and Freshwater Tanks.They are machine washable and easily changeable. The graphics are printed using dye-sublimation, resulting in a rich and vibrant finish. Always allow graphics to completely dry before using or storing. Graphics can be washed in a regular washing machine on a 30 degree wash without detergents. For this reason, we highly recommend not wrapping continuous or detailed shapes between front and rear graphics. But due to the nature of printing and the cutting / finishing of fabrics, some material movement and minor imperfections in alignment can be introduced. We make every effort to finish these graphics as accurately and consistently as possible. To avoid this, we recommend limiting the amount of light above or behind the unit, as well as adjusting the positioning of the unit. This can occur when the graphic is subject to strong lighting, especially from above or behind. This is due to the nature of fabrics that are not completely opaque. Some visibility of the frame through the graphic is possible. Stretch Fabric Walls are recommended for indoor use only, and are not suitable for outdoor use. Straight frames only: using the provided allen key, screw the feet into the frame.Fasten the zip under the bottom edge of the frame.Once the graphic is pulled as far downwards as possible, grip both left and right sides of the frame and twist the graphic into the correct position. You will now have part of the rear graphic on the front, or vice-versa. Slowly pull the graphic to the bottom of the frame. To avoid the internal hems creating an uneven finish along the edge of the unit, apply the graphic twisted about 30-50mm towards the left or right.Match the indicated numbered stickers and snap together the frame pieces.Larger graphics will need to be transported separately. Straight frames only: assembly requires one allen key (included)įor some of the smaller sized frames, the graphic can also fit inside the carry bag.Can be ordered either single-sided or double-sided.Includes a bespoke-printed graphic on Stretch Fabric.Old graphics can be recycled with other textiles. Additional or replacement graphics can be ordered separately. ![]() Assembly time is approximately 10 minutes but will vary slightly depending on size ordered. It is secured at the bottom with a zip fastening to maintain tension.Īssembly of the frame can be performed by one person, but in most cases we recommend at least two people to apply the graphic. The 260gsm stretch fabric cover is designed to fit snugly over the frame and is printed on the front with a white reverse as standard (can be printed double-sided). ![]() Stretch Fabric Walls are made up of a strong, lightweight, tubular aluminium frame and a printed fabric cover.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |